Can the electric part of the pet hair shaver be soaked in water for cleaning? The analysis is as follows:

1. The electric part is strictly prohibited from being immersed in water
Electric motors and circuit boards are afraid of water: The electric part (body) contains electronic components such as motors, batteries, and circuit boards, which may cause short circuits, corrosion, or permanent damage when exposed to water.
Waterproof ≠ Immersion: Even models labeled as "waterproof" usually only prevent splashing or brief water flushing, and prolonged immersion may still result in water ingress.

2. The correct method for cleaning the electric parts
Wet cloth wiping: Clean the surface of the device with a wrung out wet cloth to prevent liquid from seeping into the heat dissipation holes or button gaps.
Cotton swab assistance: Dip a cotton swab in a small amount of alcohol to clean dust prone areas such as ventilation openings and switch edges. Alcohol evaporates quickly and sterilizes.

3. The blade head can be safely washed with water
Only for detachable blade heads: After removing the blade head (excluding the motor), rinse it with clean water, but it must be thoroughly dried before reinstalling to avoid residual water vapor rusting metal parts.
Avoid hot water or strong cleaning agents: High temperatures or chemicals may damage the blade coating or plastic comb teeth.

Precautions
Do not use high-pressure water to flush: Even for waterproof models, high-pressure water flow may break through the sealing gasket.
Ensure dryness before charging: After cleaning, let it stand for at least 2 hours to ensure there is no moisture inside before charging.
Troubleshooting: If water accidentally enters, immediately turn off the power and invert it to dry. Do not use a hair dryer to dry with hot air.